rss icon Subscribe
desktop mobile

New Thruster Solutions Developed for Arctic Shipping

© Alexey Nagaev / Adobe Stock

A team of European marine research institutes and companies have developed creative technologies for thruster solutions that are specifically engineered for ships operating in the Arctic.

With the new solutions created under the three-year ArTEco project led by Finland's VTT and Wärtsilä, thruster lifetimes can be increased, their maintenance need can be decreased and their reliability improved, particularly in extreme conditions, the project partners said.

While at sea, a ship must overcome tough resistance as it displaces water masses from its path. Ice creates extreme loads when the power of the ship's engine is directed through the ice by the propeller. Extreme loads wear the propulsion equipment, or thruster, thereby shortening the life cycle and reducing technical reliability. Limited operations or even equipment failure cause direct and indirect costs for owners, operators and equipment and component manufacturers

The ArTEco (Arctic Thruster Ecosystem) project involved the development of innovative technologies and solutions for mechanical and rotating propulsion technology in extreme conditions. According to VTT, the results will enable the better use of ships, and the predictability of loading and failure. ArTEco has revealed a clear path to further possibilities to optimize the design of equipment even more effectively and secure the full capabilities of vessels in difficult ice conditions. Environmental loads will also be reduced when maintenance vessels are less often needed in sensitive, Arctic sea areas.

VTT developed and measured damping solutions for torsional vibrations, caused by issues such as the impact of propeller blades on ice.

"The results of the project can be applied on various vessels, icebreakers and the autonomous ships of the future, which will be able to operate in both non-Arctic and Arctic sea areas. The smart products and services of the future and new, competitiveness-boosting business opportunities will be created via the ecosystem projects. The best international research institutes in the field and industrial contributors were involved in the project," said Project Coordinator Jari Halme of VTT.

The project also involved the development of cutting-edge propeller simulation and load-specification methods, vibration damping solutions, environmentally friendly lubricants, measurement technology, and the improvement of the gear unit's load carrying capacity. These led to the creation of innovative, tested and reliable solutions. For example, changing external hubcap shapes reduced the maximum ice impact load by 30 percent, while a damper reduced vibration in the transmission by more than 20 percent. The results have been achieved in a full-scale testing environment. Similar measurements and testing have earlier never been done in this size and scale.

"ArTEco has allowed us to increase the technology readiness level for several promising solutions for propulsion products. At Wärtsilä we are committed to innovation and are continuously working in different ways to provide better products for our customers," said Anders Hedin, Project Coordinator at Wärtsilä.

VTT and Wärtsilä coordinated the ArTEco project, in which the following organizations were also involved: ATA Gears, Katsa, the Finnish Transport Safety Agency, Tampere University of Technology, SKF, TU Luleå, Klingelnberg and TU Dresden. The main funders of the project are Business Finland in Finland, Sjöfartsverket in Sweden and state funding in Germany. The project is part of the European MARTEC II (Maritime Technologies as an ERA-NET).

Oct 5, 2018

 QRCode for link to New Thruster Solutions Developed for Arctic Shipping story
 

Technology

Pump Tech Focus: Leistritz FlexCore Screw Pump Series

© Leistritz

Leistritz Pumpen GmbH is a long and storied name in maritime business, and with its FLEXCORE screw

RH Marine Maintaining Operations with Remote Services

(Photo: RH Marine)

Maritime electrical and automation systems integrator RH Marine reports it is performing an

Ecochlor Hires Scheid as Europe Business Development Manager

Sören Scheid (Photo: Ecochlor)

U.S.-based ballast water treatment systems manufacturer Ecochlor announced Sören Scheid will be

Marine Propulsion

CMS Completes First Major WinGD X-DF Engine Overhaul

CSSC Marine Service completed the first X-DF overhaul in nine days. (Photo: CSSC Marine Service Co)

China State Shipbuilding Corp (CSSC) equipment service subsidiary CSSC Marine Service Co (CMS)

Schottel Unveils New Azimuth Thrusters

The Schottel Rudderpropeller (SRP), left, and the Schottel EcoPeller (SRE) (Image: Schottel)

Marine propulsion systems manufacturer Schottel introduced its new M-series azimuth thrusters

Kongsberg Unveils Holistic Vessel Monitoring Tool

An example of the data available from the Health Management dashboard (Image: Kongsberg Maritime)

Kongsberg Maritime has introduced Health Management to its Vessel Insight portfolio of applications

Marine Equipment

Alaska Marine Lines Upgrading Its Rail Barges

(Photo: Alaska Marine Lines)

Alaska Marine Lines says four of its rail barges will receive new piping and ballast systems

Ecochlor Receives IMO BWMS Code Type Approval

(Image: Ecochlor)

Ecochlor said it has received Type Approval from the Norwegian Maritime Authority (NMA) for the

SCHOTTEL Supplies Propulsion for New Expedition Cruise Ship

Hondius and sister vessel Janssonius are said to be the first vessels in the world to be built according to the LR PC6 class (Photo: Meike Sjoer)

Following the delivery of the expedition cruise vessel Hondius in 2019, Oceanwide Expeditions