rss icon Subscribe
desktop mobile

First Carrousel Rave Tug Delivered to Novatug


By Joseph R Fonseca

Multratug 32, the first new CARROUSEL RAVE TUG (CRT) was delivered to its owner, Novatug B.V. of the Netherlands in February 2018. Multraship B.V. of the Netherlands will be the operator of the new CRT. Multraship and Novatug both belong to the Muller Maritime Group, that has been active in all types of towing operations for over 100 years.

The design features the RAVE tug concept, jointly developed by Robert Allan Ltd. and Voith Turbo GmbH & Co. KG, featuring VSP drives arranged inline on the hull centerline, combined with Novatug's patented Carrousel Towing System on the main deck. The CRT Carrousel towing system was developed by Novatug in cooperation with Multraship as the groups harbour towage operator. Novatug also cooperated with Machinefabriek Luyt B.V. to develop and manufacture the special winch that is part of its Carrousel Towing System.
According to the designer, this unique combination of propulsion and towing arrangements provides inherently safer towing and escort operations, with enhanced maneuverability for operations in confined waterways. It is also much more flexible in its ability to provide thrust at towline angles not practical with conventional ASD or tractor tugs. The CRT is designed to safely produce escort steering and braking forces approximately 50 percent greater than any other type of tug of similar size, and can do this at greater speeds with significantly reduced risk. An additional benefit is the ability to produce the required forces with less installed engine power, thus improving fuel economy and exhaust emissions.
The concept of the RAVE tug design is the result of seven years of extensive collaboration and careful research between Robert Allan Ltd. and Voith. All predicted scenarios of the environmental conditions and operational maneuvers of the RAVE tug were analyzed and checked during model tests, CFD analysis and in the Voith simulator with participation of experienced tug Masters.
The tug hull and other main steel components were fabricated and assembled by Theodor Buschmann GmbH in Hamburg. The assembly was then moved to Damen's Maaskant Shipyards for final outfitting and completion.
Multraship and Novatug provided input on experience gained from the development, construction and operation of the first ever Carrousel tug - Multratug 12. All this experience was summarized and implemented into the new advanced Carrousel System installed on the Multratug 32.
The CRT uses its lateral hull resistance and related hydrodynamic forces to create the maximum required steering and braking forces. The propulsion system is primarily used to control the tug's heading, position and speed.
It is the tug's relative heading that determines its effectiveness through the water and thus the magnitude of the towline force. At speed, significant hydrodynamic forces can be generated by simply applying minimal thrust sufficient to change the tug orientation to the escorted vessel. The capability and maneuvering performance of this unique tug lead to significant fuel savings during operations and offers increased controllability, higher safe assistance speed in harbor or port and reduced time necessary for assistance.
The combined effort has resulted in the design, construction and delivery of the first CARROUSEL RAVE TUG. This compact, 32 m tug, under 500 GT, can generate and safely apply forces during ship assist and escort operations up to 1.5 times more than any other type of similar sized tugs, Robert Allan Ltd. said.
The tug demonstrates exceptional maneuverability; it can move in any direction with a reaction time of a few seconds and can generate maximum thrust through 360 degreesm, the designer noted. It can work in confined spaces such as locks and narrow canals where other types of tugs simply cannot be effective due to water circulation effects.
The new CRT has all the necessary attributes of a standard tug such as sufficient and comfortable accommodation, large engine room convenient for service, and sufficient capacities of consumables. The wheelhouse has 360-degree visibility and a unique console arrangement for 360-degree operation. The tug is designed with all necessary safety measures that can protect tug and crew against damage from grounding, collision, flooding and fire.
The first trials showed that the tug is fully controllable, fast, powerful and has fully fulfilled the designer's and owner's expectations.

Mar 1, 2018

 QRCode for link to First Carrousel Rave Tug Delivered to Novatug story

Marine Equipment

Kalmar Eco Solutions to Dutch Terminals

Pic: Cargotec

Kalmar is helping the Dutch company Ter Haak Group to improve the sustainability of its operations

DNV GL Nod for Carver's GH Pump Line

Photo: Carver Pump

Carver Pump, a manufacturer of American-made pumps, has obtained DNV GL certification for their

Kalmar Bags Bilbao Forklift Order

Pic: Cargotec

Terminal automation provider Kalmar, part of Cargotec, has concluded an agreement to supply

New Products

Powertak: Powered Lift and Drive

Photo: Presto ECOA Lifts

The PowerStak family of high performance, fully powered stackers from Presto ECOA offer

Furuno Introduces FAR22X8BB Radar

Photo: Furuno

With more than 60,000 installations on vessels ranging from tugboats to aircraft carriers

New Product Launch: ABI-CAR Welding Tractors

ABICOR BINZEL has announced their entrance into the Hard Automation arena with the launch of their first Welding Tractor product ABI-CAR.

ABICOR BINZEL has announced their entrance into the Hard Automation arena with the launch of their